PRODUCTS

BROWNIE
POLYWOOL Board

POLYWOOL Board is designed for applications where fire safety, high thermal and acoustic insulation performance is required at minimal thickness. Available in rigid or semi-rigid board form, offered plain or faced with Foil-Scrim-Kraft (FSK) facings materials to complement its base material performance properties.

Manufactured by spinning molten glass, containing up to 80% recycled content, into fine wool like fibres. The inorganic fibres are bonded together using a thermosetting resin binder and the product can be identified by its golden yellow appearance. POLYWOOL Board glass mineral wool insulations are non-combustible, rot-proof, odourless, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria.

 





  • APPLICATIONS
    Custom Curtain Wall Construction
    • Exterior curtain wall cavities – exceptionally well suited to curtain wall construction in terms of both installation and performance

    Standard Metal Panel Construction
    • Field-installed between an interior liner and the outer metal panel using boards that are plain or faced with a factory-applied vapour retarder

    New and Retrofit Construction
    • Provides thermal and acoustical insulating values for exterior curtain wall cavities, parking structures, mechanical rooms, theaters, casinos and other construction applications

    General Construction
    • A versatile insulation, it is also an ideal thermal barrier for masonry or concrete structures such as shopping centers, banks and other types of low-rise buildings. In masonry applications, the glass mineral wool boards faced with an FSK vapour retarder are installed between ‘Z’ or hat channels applied directly to the masonry surface. Normally, gypsum board and/or architectural panels are then used as interior surfaces
  • ADVANTAGES
    • Optimal fibre diameter
    • Better fibre network
    • Less dusty and less itchy
    • Low ‘K’ factor
    • Excellent Acoustical Properties
    • Non-corrosive
    • Do not encourage mould growth
  • THERMAL PERFORMANCE
    Comply with ASTM C518 at 15°C mean temperature. Thermal conductivity as low as 0.0300W/mK
  • ACOUSTICAL PERFORMANCE
    POLYWOOL Board acts as a natural and effective sound barrier and the perfect solution for many sound transmission and reverberant noise problem. It is available with acoustic performance up to NRC 1.00. Please contact PGF Insulation representative for further information.
  • FIRE PROPERTIES
    Tested in accordance and comply with (plain/unfaced):
    • B.S. 476: Part 6 Fire propagation
    • B.S. 476: Part 7 Surface spread of flame
    • ASTM E84
  • PRODUCT RANGE
     POLYWOOL BOARD (32kg/m3) EWBR2532 EWBR5032
    Thickness (mm) 25 50
    K-Value (m2K/W) 0.0320 0.0320
    R-Value (W/mK) 0.78 1.56
    POLYWOOL BOARD  (48kg/m3) EWBR2548 EWBR5048
    Thickness (mm) 25 50
    K-Value (m2K/W) 0.0300 0.0300
    R-Value (W/mK) 0.83 1.66
    POLYWOOL BOARD  (64kg/m3) EWBR2564 EWBR5064
    Thickness (mm) 25 50
    K-Value (m2K/W) 0.0300 0.0300
    R-Value (W/mK) 0.83 1.66
    POLYWOOL BOARD  (80kg/m3) EWBR2580 EWBR5080
    Thickness (mm) 25 50
    K-Value (m2K/W) 0.0300 0.0300
    R-Value (W/mK) 0.83 1.66
    POLYWOOL BOARD  (96kg/m3) EWBR2596 EWBR5096
    Thickness (mm) 25 50
    K-Value (m2K/W) 0.0300 0.0300
    R-Value (W/mK) 0.83 1.66
    Dimension: 1.2m (width) x 2.3m (length)
    Note: Please contact PGF Insulation sales representative for custom sizes.
  • AVAILABLE FORMS
    Unfaced or Plain
    • Unfaced boards are designed for thermal and acoustical insulation applications
    Faced 
    • Available either in single sided or double sided Foil